Thermocore 24000 BTU AC-Heat 23 SEER
24000 BTU Ductless Mini Split AC: 18.5 SEER
Inverter w/ 24,000 BTU Heat Pump Thermocore T7E18S-H224 Ductless Mini Split - 24000 BTU Cooling Capacity along with a 24,000 BTU Heat Pump, this 2 TON Ductless Split can cool or heat an area over 900 ft². 220VAC OPERATION.Advanced INVERTER DC Technology provides both energy efficient operation and low ambient temps. Additional features include auto-diagnostic functions and sleep mode / 24 hour timer. Pre-charged with R454B and includes 16ft install Kit.
Technical Data:
System Includes:
- 24,000 BTU INVERTER Cooling Capacity
- 24,000 BTU INVERTER Heat Pump
- 18.5 SEER - 9.8 HSPF - Energy Star AHRI
- Pre-Charged with R454B for 25ft of Lineset
- 1 Year Parts - 5 Year Compressor Warranty
- Indoor Unit - Air Handler.
- Outdoor Unit - Compressor.
- Digital Multi-function LCD Remote Control
- Installation Kit with 15' of lineset.
- Product and Installation Manual.
Top Line Features:
- 18.5 SEER - 9.8 HSPF - Energy Star
- Pre-Charged w/ Eco-friendly R454B Refrigerant
- Operates on Standard 220 VAC Power Input
- Cross Flow Technology reduces noise output
- Compatible with over 5 filtration medias
- Freon Leak Detection > Notification system
- Low Ambient Temperature Operation
- Two-direction Air vane Evenly Distributes Air
- Restart IC: Settings restored Following Outage
- Follow-Me Function tracks Remote Location
Indoor Unit specs
Capacity 24000 BTU
Air Flow (Hi/M/Lo) 330-729 (cfm)
Power Supply 230 V / 60 Hz / 1Ph
Noise Output (Hi/M/Lo) 52 dBA
Liquid / Gas 3/8" x 5/8"
Weight 31 lbs
Dimensions (W x D x H) 42.6" x 9.2" x 13.3" inches
Outdoor Unit (condenser) specs
Model Number
T7E18S-H224-C
Compressor
Toshiba (GMCC)
Capacity
6200 - 24700 BTU
Air Flow
1764 cfm
Power Supply
208-230 V / 60 Hz, 1Ph
Input Power
2474W
SEER
18.5
EER 9.6
HSPF
9
Fuse Size
20A
Sound Level
62 dB
Refrigerant
R454B / 25ft (Pre-Charged)
Maximum Pipe Length 164 ft
Maximum Elevation 82 ft
Operating Temperature
5 - 122 F
Weight
94.6 Lbs
Dimensions (W x D x H)
35 x 13.46 x 26.5 inches
Install Kit Contents:
- 15 Feet Flared Copper Tubing
- 15 Feet Pipe Insulation
- 15 Feet Electrical Wire Harness
- Drain Pipe (Indoor)
- Indoor wall Mounting Bracket
- Remote Control Wall Bracket
- Wall Hole Block Putty & Insulated Tape
*** Extend 15 foot copper lineset to 25-30-40-50-65 feet. Just $4.50 / foot*** WHAT IS DC INVERTER? DC Inverter Air Conditioners are the ultimate cooling technology of the HVAC field. They are called "DC inverter" because the alternative current (AC) is converted to Direct Current (DC) then, direct current inverted back to Alternative current with desired frequency. The current supplied through the wall outlet has fixed frequency which is 60 Hertz. Different frequencies supplied to the compressor will result in different running speeds of the compressor. Inverter control systems use Pulse Amplitude Modulation (PAM) that is the most advanced and energy efficient method of inverting the current. DC Inverter AC's bear special compressors that their speed could be changed by increasing or decreasing the frequency of the supplied power. Therefore, unlike conventional split Air Conditioners Pumps which cycle between on and off repeatedly, the DC Inverter control system will monitor the room temperature and adjust the compressor speed automatically.
Conventional compressors turn on and off to maintain the room temperature at desired level. This will result compressor to draw tremendous energy each time it starts up. This will also reduce the life-span of the compressor and other components that are turning on and off. Once a conventional system is running, it runs at its maximum speed, consuming the maximum amount of energy in order to produce the maximum of cooling to maintain the desired temperature. The system will then cycle between on and off in an effort to maintain this temperature. When a DC Inverter compressor initially starts up, it runs with a higher speed to bring the room temperature to desired level rapidly, Once the set temperature is reached, it slows down and adjust its capacity just to counter the heat loss or heat gain of the building. Constant temperature is maintained.
BASIC OVERVIEW: The indoor unit is hung like a picture frame approximately 6 - 8 feet above the floor usually on an exterior wall. A 2-3 inch hole must be made behind the indoor unit in the exterior wall to run the refrigerant copper tubing, electrical wires and the condensate drain to the outside unit. The indoor unit and outdoor unit are connected to each other by means of refrigerant copper tubing and electrical cables. The condensing unit comes pre-charged with R410A Freon however, procedures such as conducting leak tests etc. are still important steps in ensuring proper functioning of a split AC. *Although installation may seem easy to some, certain tools and experience is necessary to complete setup of a mini split. It is highly advised a certified HVAC technician complete installation to be eligible for warranty. See warranty details below >
*5 Year Compressor - 1 Year on all other Parts* Registration card will be sent with unit, this card should be completed by an HVAC technician (installer). Installation of a mini split must be completed by a licensed HVAC (Heating, ventilating, & air conditioning) company to ensure any issues encountered in the future are not due to improper installation / workmanship.Even though mini split setup is below the expertise requirements of central AC systems, these are not "plug-n-play" units that can be properly installed without certain tools any prior HVAC - electrical knowledge. The installation includes electrical, gas, and refrigerant connections and generally regulated by a multiple sets of laws, codes and guidelines, at the federal, state and local levels. The failure to properly install HVAC equipment can raise personal safety and performance concerns.Warranty service - troubleshooting is provided through the contractor / installer and will be upheld as long as policies are observed. Once a non-defective unit is installed by a HVAC company, chances of anything going wrong are very slim and almost all contractors will guarantee there workmanship and provide future service free of charge (installation warranty). If it was determined that the unit is not functioning due to a defect and needs to be replaced, the part will be sent free of charge up to 1 year from date of purchase or 5 years for the compressor. If you receive a damaged or defective product, a replacement unit will be sent out Free of cost. Damaged / Defective product will be picked up and a brand new exchange will be shipped out.
SHIPS TO TO BOTH UNITED STATES AND CANADIAN LOCATIONS!Our Thermocore systems ship via RL Carriers or similar LTL freight service out of Warren, Michigan and are palletized onto a single skid. Transit time is usually between 4 to 6 business days from payment receipt depending on where you are geographically located. Please provide a contact phone# upon checkout (to be used for delivery purposes only). SOMEBODY MUST BE ON SITE TO ACCEPT / SIGN FOR Order. Failure to provide valid contact# will delay order.